_URB_CONTROL_FEATURE_REQUEST structure

The _URB_CONTROL_FEATURE_REQUEST structure is used by USB client drivers to set or clear features on a device, interface, or endpoint.

Syntax

C++


struct _URB_CONTROL_FEATURE_REQUEST {
  struct URB_HEADER  Hdr;
  PVOID               Reserved;
  ULONG               Reserved2;
  ULONG               Reserved3;
  PVOID               Reserved4;
  PMDL                Reserved5;
  struct URB  *UrbLink;
  struct URB_HCD_AREA  hca;
  USHORT              Reserved0;
  USHORT              FeatureSelector;
  USHORT              Index;
  USHORT              Reserved1;
};

Members

Hdr

Pointer to a _URB_HEADER structure that specifies the URB header information. Hdr.Function indicates either a set or a clear feature operation, to perform on a device, interface, endpoint or other non-standard component. Hdr.Function must have one of the following values:

URB_FUNCTION_SET_FEATURE_TO_DEVICE

URB_FUNCTION_SET_FEATURE_TO_INTERFACE

URB_FUNCTION_SET_FEATURE_TO_ENDPOINT

URB_FUNCTION_SET_FEATURE_TO_OTHER

URB_FUNCTION_CLEAR_FEATURE_TO_DEVICE

URB_FUNCTION_CLEAR_FEATURE_TO_INTERFACE

URB_FUNCTION_CLEAR_FEATURE_TO_ENDPOINT

URB_FUNCTION_CLEAR_FEATURE_TO_OTHER

Hdr.Length must equal sizeof(_URB_CONTROL_FEATURE_REQUEST).

Reserved

Reserved. Do not use.

Reserved2

Reserved. Do not use.

Reserved3

Reserved. Do not use.

Reserved4

Reserved. Do not use.

Reserved5

Reserved. Do not use.

UrbLink

Reserved. Do not use.

hca

Reserved. Do not use.

Reserved0

Reserved. Do not use.

FeatureSelector

Specifies the USB-defined feature code to be cleared or set. Using a feature code that is invalid, cannot be set, or cannot be cleared will cause the target to stall. The bus driver will copy the value in the FeatureSelector member to the wValue field of the setup packet.

Index

Specifies the device-defined index, returned by a successful configuration request, if the request is for an endpoint or interface. Otherwise, Index must be zero. The bus driver will copy the value in the Index member to the wIndex field of the setup packet.

Reserved1

Reserved. Do not use.

Remarks

Drivers can use the UsbBuildFeatureRequest service routine to format this URB.

The reserved members of this structure must be treated as opaque and are reserved for system use.

When a driver arms a USB device for remote wakeup with an IRP_MN_WAIT_WAKE request, the USB bus driver automatically sets remote wakeup feature on the device. A control feature URB is not necessary.

Likewise, when a driver issues a URB with a function type of URB_FUNCTION_SYNC_RESET_PIPE_AND_CLEAR_STALL to a pipe, the bus driver will automatically clear the pipe's endpoint stall feature. The driver does not have to send a control feature URB to the pipe to clear the endpoint stall.

Requirements

Header	Usb.h (include Usb.h)

_URB_CONTROL_FEATURE_REQUEST structure

Syntax

Members

Remarks

Requirements

See also