USB-IF Certification Validation Test (Device)

This test checks the USB Implementers Forum (USB-IF) test ID that is provided after a device passes the USB-IF test.

Note
For a white paper about the Hardware Certification Kit (HCK) USB Implementers Forum (USB-IF) testing requirements, see Windows Hardware Certification Kit USB-IF Testing.

Test details

Associated requirements	Device.Connectivity.UsbDevices.UsbifCertification See the device hardware requirements.
Platforms	Windows 7 (x64) Windows 7 (x86) Windows RT (ARM-based) Windows 8 (x64) Windows 8 (x86) Windows Server 2012 (x64) Windows Server 2008 R2 (x64) Windows RT 8.1 Windows 8.1 x64 Windows 8.1 x86 Windows Server 2012 R2
Expected run time	~2 minutes
Categories	Certification
Type	Manual

Before you run the test, complete the test setup as described in the test requirements: USB Device.Connectivity Testing Prerequisites.

In addition, this test requires the following:

The USB-IF ID value of your test device or the self-test logs for the device. You must set these parameters when you schedule this test. See the More information section for details.

Parameter	Description
TEST_ID	The USB IF test ID.
PATH_TO_LOGS	If you do not specify a path to the log file, you must create the folder C:\USBLogs.
INTEROP_TESTS_PASSED	Confirms that the USB IF Interoperability tests ran and passed.