Boot Test (LOGO)

Before you run the test, complete the test setup as described in the test requirements for the type of storage controller that you are testing: Storage Adapter or Controller Testing Overview.

Before starting the test, you must ensure that the test adapter is the boot adapter in the system. This system does not need to be the only system in your machine pool. You can use a secondary system that does not meet the setup requirements for your certification program for this test, if necessary.

For troubleshooting information, see Troubleshooting Device.Storage Testing.

Ensure that Microsoft .NET Framework version 4.5 or later is installed on the system.

If the logotype option is specified as system, the test will determine which device to use. If the logotype is specified as device, or none is given, the test accepts a device instance path, and it enumerates all of the device's children and finds disks that are equal to or below the device that is specified. The test then finds all of the volumes that span these disks. The test validates that the operating system is installed on one of these volumes and that the boot loader exists on one of the disks.

Parameters

 

Parameter	Description
WDKDeviceID	The device instance ID.

Warning
For command line help for this test binary, type /h.

Command usage

Command syntax

 

Command option	Description
BootTest	The command line options for the test are listed below.
/device	The instance path of the device to test.
/logotype	Optional parameter that specifies which certification program to test. Possible values are system and device. Default value: device

Note
For command-line help for this test binary, type /h.

File list