TPM OOBE Provisioning
This automated test validates that Windows Setup and TPM provisioning happen in the correct order. This test ensures that the TPM does not get provisioned before OOBE finishes, thereby ensuring that the OEM imaging process results in the TPM being in the correct state when a user logs in. The test checks for the TPM provisioning event to be seen within a few minutes of OOBE being completed.
Test details
|
Associated requirements |
System.Fundamentals.TPM20.TPM20 |
|
Platforms |
Windows RT (ARM-based)
|
|
Expected run time |
~10 minutes |
|
Categories |
Certification |
|
Type |
Automated |
Running the test
Before you run the test, review the prerequisites in TPM System Fundamentals Testing Prerequisites.
This test requires that the system be imaged through the OEM manufacturing process (that clears the TPM as part of the deployment). This test should only be run on systems that have gone through an OEM-style imaging process.
 Note |
|---|
| While running this test, the time zone should not be changed in OOBE. |
Troubleshooting
For troubleshooting information, see Troubleshooting System Fundamentals Testing.
This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio. To provide more information for troubleshooting failures in this test, you can enable tracing of the TPM. Refer to the steps provided under the Troubleshooting section in TCG TPM Integration Test (Manual). Investigations also need log files with name like ‘tpm*.txt’ and console.txt from the ‘Documents’ folder
See Also