Expand Minimize

ACPI Logo Test

This test checks the system ACPI tables against a set of ACPI 5.0 requirements for general resource consistency (_CRS) and correct usages of _DIS/_STA methods. It also validates specific ACPI requirements for HIDI2C and five-button array devices, as well as those systems that support InstantGo. In addition, the test ensures proper ACPI definition of TPM 1.2/2.0 devices per Hardware Certification requirements.

Test details

 

Associated requirements

System.Fundamentals.Firmware.ACPI

See the system hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86

Expected run time

~30 minutes

Categories

Basic
Certification

Type

Automated

Running the test

Before you run the test, complete the test setup as described in the test requirements: WDTF System Fundamentals Testing Prerequisites.

noteNote
You must enable test-signing for the test system before you run the test. You must either disable Secure Boot or install debug policy (ARM platform only) before executing this test.

Troubleshooting

For troubleshooting information, see Troubleshooting System Fundamentals Testing.

More information

Command syntax

 

Command option Description

acpilogo.exe –Install %cd%\acpifilter.inf

Install the ACPI logo test driver; note that a reboot is required after running this command.

acpilogo.exe –Logo

Runs the ACPI logo test; the test results are logged to AcpiLogo.wtl.

acpilogo.exe –Uninstall

Uninstall the ACPI logo test driver

noteNote
For command line help for this test binary, type /h.

Show:
© 2014 Microsoft. All rights reserved.