Expand Minimize

TPM Based Virtual Smart Card Interface Test

This test runs the TPM-based virtual smart card hardware certification tests. In the setup steps, the TPM is set to the Ready state and TPM_ResetLockValue is issued. This test covers the Pre-Setup phase, the Setup phase and the Execution phase. TPM Smart Card Provisioning and usage scenarios are tested.

Test details

 

Associated requirements

System.Fundamentals.TPM20.TPM20
System.Fundamentals.TrustedPlatformModule.TPMComplieswithTCGTPMMainSpecification
System.Fundamentals.TrustedPlatformModule.TPMEnablesFullUseThroughSystemFirmware
System.Fundamentals.TrustedPlatformModule.TPMRequirements
System.Fundamentals.TrustedPlatformModule.Windows7SystemsTPM

See the system hardware requirements.

Platforms

Windows RT (ARM-based)
Windows 8 (x64)
Windows 8 (x86)
Windows Server 2012 (x64)
Windows RT 8.1
Windows 8.1 x64
Windows 8.1 x86
Windows Server 2012 R2

Expected run time

~10 minutes

Categories

Certification
Functional

Type

Manual

Running the test

Before you run the test, review the prerequisites in TPM System Fundamentals Testing Prerequisites.

This test has no additional test parameters.

Troubleshooting

For troubleshooting information, see Troubleshooting the Windows HCK Environment.

This test returns Pass or Fail. To review test details, review the test log from Windows Hardware Certification Kit (Windows HCK) Studio.

To provide more information for troubleshooting failures in this test, you can enable tracing of the TPM. Refer to the steps provided in the TCG TPM Integration Test (Manual).

See Also

Show:
© 2014 Microsoft. All rights reserved.